Weissenborn | Kona Style 2 | 1920’s | 7 (our database)
All pictures – Click to enlarge!- Highly recommended
Please email with any corrections/ additional info
We aim to keep each entry as complete as possible & your help is appreciated!
- Model: Kona Style 2
- Year: 1920’s
- Top: Koa
- Back and sides: Koa
- Body Length:10.5″
- Upper Bout: 9.5″
- Lower Bout: 13.5″
- Body Depth Neck Heel: 3 2/16″
- Body Depth Tail Block: 4″
- Scale Length: 25″
- Nut Width: 1 7/8″
- String Spacing: 2.5″
- Rosette: Rope
Kona guitars were built for a Mr Charles S. DeLano from approximately 1915. He was a self styled “instructor of Hawaiian steel guitar” and like the other slide guitar purveyors, likely sold instruments alongside his instructional material. Although initially built by 2 seperate luthiers: Norwegian born Chris Knutsen and German born Hermann Weissenborn. Knutsen, the older luthier was born in 1856 and moved from Seattle to Los Angeles in 1916. Weissenborn was 7 years junior and initially started in New York but also ended up in Los Angeles around 1910.
Knutsen was born Johan Christian Kammen June 24, 1856 in Norway and is best known was an innovator, building most of his guitars with spruce tops, lateral bracing and cruder building techniques such as his use of screws, brackets and unusual shaped nuts. He is best known for his harp guitars which feature a large hollow arm for sub-bass strings.
German born Weissenborn had a more standardised, refined building philosophy and his guitars featured mostly x braced koa tops and several different “styles” with increasing levels of ornamentation. After around 1923, Kona guitars were built exclusively by Weissenborn.
The levels of ornamentation in 1930 were:
Style 1: Plain (retail price $40)
Style 2: Above plus rope purfling around the soundhole. (retail price $56)
Style 3: Above plus rope purfling along the fingerboard. (retail price $67.50)
Style 4: Rope purfling around the soundhole, top, back, fingerboard and headstock and fancy fretboard inlays. (retail price $79)
In general, increasing figure in the Koa with increasing style numbers.
Kona guitars differ from the more common “Weissenborn” style in that the neck in a Kona is partially built in the spanish style and partially hollow, whereas the “Weissenborn” guitars have an entirely hollow neck. Additionally, they had slightly deeper bodies, narrower bouts and the short solid neck had bone nuts and wire frets.
The owner comments “ This is a very nice example of a Koa Weissenborn steel guitar. All koa wood construction, round neck (but set up for Hawaiian style playing), X-braced top, 4-1/4″ depth, 19 frets, pearl inlays, 1-15/16″ nut width, ~24-7/8′ scale, checkerboard rope around sound hole. “
Classic Instruments, Weissenborn Style#4, By: George Gruhn and Walter Carter, vintage guitar magazine, 3/13/2009
Christiaan Oyens, Weissenborn Knutsen the Hawaiian Steeel Guitar
Pictures kind courtesy of joey brauer
Errors are unintentional although we try very hard not to make them- corrections or feedback are always welcome! Guitars are property of individual owners.
Any infringement of copyright is entirely unintentional. Any copyright issues should be address to: firstname.lastname@example.org. We will attempt to resolve these issues quickly. Guitars remain property of respective owners.